Mini-Symposia

A: Properties of materials and structures

A1 Composite materials, including natural fibers and matrices
Joris DEGRIECK, Gent University, Belgium
Alain VAUTRIN, Ecole Nationale des Mines de Saint Etienne, FRANCE

[263] Tensile behaviour of natural fibres. Effect of loading rate, temperature and humidity on the “accommodation” phenomena.
            PLACET Vincent

[276] Experimental characterization of damage in SiC/SiC minicomposites
            CHATEAU Camille , GELEBART Lionel , BORNERT Michel , CREPIN Jerome , CALDEMAISON Daniel , BOLLER Elodie , SAUDER Cedric , LANGER Max , LUDWIG Wolfgang

[366] Real time sensing of structural glass fiber reinforced composites by using embedded PVA - carbon nanotube fibers
            ALEXOPOULOS Nikolaos , POULIN Phillipe , BARTHOLOME Christele , MARIOLI RIGA Zaira

[395] Experimental characterization of thermo-oxidation induced shrinkage and damage onset in polymer matrix composites at high temperature
            VU Dinh quy , GIGLIOTTI Marco , LAFARIE Marie christine , GRANDIDIER Jean claude

[466] Mechanical behavior of mullite-zirconia composites
            SAHEB Nouari , SAHNOUNE Foudile

[618] MECHANICAL BEHAVIOUR OF COMPOSITE MATERIALS MADE BY RESIN FILM INFUSION
            PAPPALETTERE Carmine , CASAVOLA Caterina , BARILE Claudia , TURSI Francesca

[463] Direct Numerical Simulation of Fracture Behaviour for Random Short Wood Fibres Reinforced Composites, Comparison with Digital Image Correlation Experiments
            SHEN Min , TOUCHARD Fabienne , BEZINE Gerard , BRILLAUD Jean

[494] Investigation on mechanical properties of basalt composite fabrics(experiment study)
            TALEBI MAZRAEHSHAHI Hassan , ZAMANI Hossein

[391] Multi scale analysis by acoustic emission of damage mechanisms in natural fibre woven fabrics/epoxy composites
            BONNAFOUS Claire , TOUCHARD Fabienne , CHOCINSKI-ARNAULT L

[464] Interlaminate Deformation in Thermoplastic Composite Laminates: Experimental-Numerical Correlation
            SHEN Min , TONG Jingwei , WANG Shibin , FANG Yihong

[435] Free edge effects study in laminated composite using Digital Image Correlation: effect of microstructure and geometrical singularity
            LECOMTE Pauline , PALUCH B. , BRIEU M.

[522] Study on interlock 3X damage mechanisms under impact loading using a deformable impactor
            DAU Frederic , DUPLESSIS KERGOMARD Yann


A10 Wood and wood-based composites
Frédéric DUBOIS, Université de Limoges, FRANCE

[309] Experimental approach about fracture process in timber elements under mechano-sorptive effects
            DUBOIS Frederic , POP Octavian , HUSSON J. m. , SAUVAT N.

[412] Damage of Wood-Concrete Composite subjected to variable hygrometric conditions
            CARE Sabine , LOULOU Louisa , LE ROY Robert , BORNERT Michel

[461] Experimental and modeling buckling of wood-based columns under repeated loading
            NAFA Zahreddine , BOURAS F. , CHAPLAIN M.

[605] Interaction between mechano-sorptive and viscoelastic response of wood at high humidity level
            MONTERO Cedric , GRIL Joseph , CLAIR Bruno

[446] Study of Wood Plastic Composites elastic behaviour using full field measurements
            ROBERT Laurent , BEN MBAREK Talel , HUGOT Francoise , ORTEU Jean jose , SAMMOUDA Habib , GRACIAA Alain , CHARRIER Bertrand

[537] Wood transverse fracture at the mesoscopic scale
            BIGORGNE Loane , BRUNET Michel , MAIGRE Hubert


A11 Shape memory alloys
Elzbieta PIECZYSKA, IFTR, Warsaw , POLAND
Etienne PATOOR, Université de Metz, FRANCE

[350] Structural characterization of Cu -13.58 Al- 3.94 Ni (wt. %) shape memory alloy elaborated by fusion
            SAID Zeghdane , NECIB K. , BRITAH A.

[533] Stability and elastic properties of beta Ti-alloys for biomedical application designed with electronic parameters.
            ELMAY Wafa , LAHEURTE Pascal , EBERHARDT Andre , BOLLE Bernard , PATOOR Etienne , GLORIANT Thierry , LAILLE Denis , PRIMA Frederic , CASTANY Philippe , WARY Marc

[31] Ni-Mn-Ga single crystal Shape Memory Alloy magneto-thermo-mechanical modeling
            LEXCELLENT Christian , GAUTHIER Jean yves , HUBERT Arnaud , ABADIE Joel , CHAILLET Nicolas

[398] Infrared imaging of TiNi shape memory alloy subjected to tension at various temperatures
            PIECZYSKA Elzbieta , TOBUSHI Hisaaki

[543] Loading rate history, unloading rate and holding time effect on nanoindentation hysteresis of NiTi
            AMINI Abbas , SUN Qing Ping

[545] size and rate effect on material characterization of NiTi in nanoindentation
            AMINI Abbas , SUN Qing Ping

[568] Magnetic field induced strain assisted by stress in Ni-Fe-Ga-Co single crystals
            FRANCESC Masdeu , PONS J. , CESARI E. , KUSTOV S. , DUTKIEWICZ J. , CHUMLYAKOV Y.

[514] Role of time scale in the deformation patterns and hysteresis of NiTi SMA
            QINGPING SUN Qingping , YONGJUN HE Yongjun

[314] Thermoelastic analysis of copper-based monocristalline shape-memory alloys
            BALANDRAUD Xavier , DELPUEYO Didier , GREDIAC Michel

[315] Evolution of the martensitic transformation in shape memory alloys under high strain rates
            SALETTI Dominique , PATTOFATTO Stephane , ZHAO Han



A2 Biomaterials, bio-compatible materials and biomechanics
Brian K. BAY, Oregon State University , Corvallis , USA

[577] Modeling of structural effects in biomedical elements after titanium oxidation in fluidized bed
            SZOTA Michal , JASINSKI J. , MENDZIK K.

[334] A biomechanical analysis of the Ilizarov external fixator
            STAVROS Kourkoulis , MITOYSOYDIS Athanasios , MAGNISSALIS Evangelos

[572] Evaluation of Strength in the “Toronto” Osseous-Prosthesis System
            GIACOMO Risitano , CICCIU Marco , DINI Riccardo , FRANCESCHINI Giordano , MAIORANA Carlo

[585] Experimental analysis of mechanical response of stabilized occipitocervical junction by 3D mark tracking technique
            GERMANEAU Arnaud , DOUMALIN Pascal , DUPRE Jean-christophe , BREQUE Cyril , BREMAND Fabrice , D'HOUTAUD Samuel , RIGOARD Philippe

[511] Determination of the less disturbed markers by skin movement artefact
            MONNET Tony , THOUZE A. , BEGON Michael , PAIN M. T. G.

[473] The role of skin topography in tactile transduction of fine textures
            SCHEIBERT Julien , PREVOST Alexis , DEBREGEAS Georges

[316] The Effect of Cyclic Loading on the Mechanical Performance of Surgical Mesh
            PATTERSON Sarah , HO Yi chieh , WANG Wei chung

[508] A study of heat distribution in human skin: use of Infrared Thermography
            RATOVOSON Domoina , JOURDAN F. , HUON Vincent

[457] The influence of contact surface shape on the mechanical properties of osteosynthetic plates
            BAKIC Ante , KODVANJ Janos , HORVAT Marko


A3 Soils and geomaterials
Cino VIGGIANI, Université de Grenoble , FRANCE
Michel BORNERT, Ecole Polytechnique, Palaiseau, FRANCE

[515] A large 3D physical model: a tool to investigate the consequences of ground surface movements on the surface structures
            CAUDRON Matthieu , HOR B. , EMERIAULT F. , ALHEIB M.

[342] Very slow creep tests on rock samples
            BEREST Pierre , BERAUD J. F. , BROUARD B. , BLUM P. A. , CHARPENTIER J. P. , DE GREEF V. , GHARBI Hakim , VALES F.

[353] A 12-year long cavern abandonment test
            BEREST Pierre , HEVIN Gregoire , BROUARD B.

[551] High-pressure experimental models of geological structures
            COUPLES Gary , LEWIS H.

[268] Morphology of pore space in claystones from reference sites for research - Characterization of porosity from ion beam sectioning and cryo-SEM observations
            DESBOIS Guillaume , HOUBEN Maartje e. , SHOLOKHOVA Yelena , URAI Janos l.

[344] Stress path dependent hydromechanical behaviour of heterogeneous carbonate rock
            DIMANOV Alexandre , DAUTRIAT J. , GLAND N. , RAPHANEL J.

[343] In-situ analysis of strain localization related to structural heterogeneities of carbonate rocks
            DIMANOV Alexandre , DAUTRIAT J. , BORNERT Michel , GLAND N. , RAPHANEL J.

[459] Local characterisation of fluid flow in sandstone with localised deformation features through fast neutron imaging
            HALL Stephen , HUGHES D. , ROWE S.

[502] Experimental characterisation of shear and compaction band mechanics in porous sandstone by a combination of full-field measurements
            CHARALAMPIDOU Elli maria

[279] Advanced acoustic emission analysis of brittle and porous rock fracturing
            STANCHITS Sergei , DRESEN Georg

[266] Freezing and melting of water in porous geomaterials studied by magnetic resonance
            BYTCHENKOFF Dimitri , RODTS Stéphane , MOUCHERONT Pascal , HAUTEMAYOU David , MEZIERE Cédric , FAURE Paméla , FEN CHONG Teddy

[331] Monitoring transient hydro-chemo-mechanical processes in porous media using electrical resistivity tomography
            FOTI Sebastiano , COMINA C. , COSENTINI R. , DELLA VECCHIA G. , MUSSO G.

[371] Experimental techniques for the investigation of coupled phenomena in geomaterials
            ROMERO Enrique

[414] The external and internal measurements impact on shear modulus distribution within cyclic small strains in triaxal studies into cohesive soil
            JASTRZEBSKA Malgorzata

[583] Study on the Dynamic Behavior of foundations on Saturated Loose Sand by means of 1-G Shaking Table Tests
            AMIN TUTUNCHIAN Mohammad , SHAHNAZARI H. , HASHEMI H. r.

[335] The formation of open fractures using cohesive materials, the results of scaled analogue and numerical modelling of porosity development.
            VAN GENT Heijn , ABE Steffen , URAI Janos l. , HOLLAND Marc

[362] Penetration of chlorides in hardened concrete during salt scaling cycles
            BOUTEILLE Sebastien , FEN CHONG Teddy , DIERKENS Michael , DANGLA Patrick , MORAL Nathalie , BOULANGER Sebastien

[499] Measurement techniques for in situ stresses around underground constructions in a deep clay formation
            VERSTRICHT Jan , AREIAS Lou , BASTIAENS Wim , LI Xiang Ling

[438] Optimized optical setup for DIC in rock mechanics
            YANG Diansen , BORNERT Michel , GHARBI Hakim , VALLI Pierre

[509] Combined full field stress and strain measurement methods for granular mechanics
            DIJKSTRA Jelke , BROERE W.

[500] Imaging sand deformation at the grain scale
            VIGGIANI Cino , BESUELLE P. , HALL Stephen , DESRUES J.

[267] Multiscale porosity in a tight gas sandstone reservoir: insights from Argon beam cross-sectioning and high resolution SEM imaging
            DESBOIS Guillaume , ENZMANN Frieder , URAI Janos l. , BAERLE Claudia , KUKLA Peter a. , KONSTANTY Jan

[425] Characterizing soil macroporosity by X-ray microfocus computed tomography and quantification of the soil coring effects.
            GALLIER Jonathan , HUBERT Fabien , ROBINET Jean charles , SARDINI Paul , CANER Laurent

[297] Mode II fracture toughness determination using the Punch- Through Shear with Confining Pressure experiment
            BACKERS Tobias , STEPHANSSON Ove , DRESEN Georg

[441] The influence of friction on the stress field of the Brazilian disc test: An experimental and theoretical analysis
            STAVROS Kourkoulis , MARKIDES C. , PAZIS D. N.



A5 Concrete based materials
Gonzalo RUIZ, Universidad de Castilla-La Mancha, Ciudad Real , SPAIN

[490] Fiber Reinforced Cement Mortars Degradation after their Exposure to Fire Conditions
            PANDERMARAKIS Zacharias , SOTIROPOULOU Anastasia , NIKOLOUTSOPOULOS Nikolaos

[493] Rheological and Mechanical Response Modifications for a Self-Leveling Mortar
            PANDERMARAKIS Zacharias , SOTIROPOULOU Anastasia , KATSIADRAMIS Nikolaos

[359] Detecting crack profile in concrete using digital image correlation and acoustic emission
            ALAM Syed yasir , LOUKILI A.

[592] Early-age autogenous cracking of cement-based systems: from physico-chemical analysis to micro/macro investigations
            MOUNANGA Pierre , BOUASKER Marwen , PERTUE Arnaud , KHELIDJ Abdelhafid

[593] Early-age volume changes of extrudable reactive powder concrete
            MOUNANGA Pierre , CHERKAOUI Khalid , COURTIAL Mireille , DUNSTETTER Frederic , KHELIDJ Abdelhafid , DE NOIRFONTAINE Marie noelle

[328] Evolution of the fracture process zone in high-strength concrete under different loading rates
            ZHANG Xiaoxin , YU Rena c. , RUIZ Gonzalo , TARIFA Manuel , CAMARA Miguel

[329] Loading rate effect on the fracture behaviour of high-strength concrete
            ZHANG Xiaoxin , RUIZ Gonzalo , YU Rena c. , ELISA Poveda , ROCIO Porras , DEL VISO Javier


A6 Sandwich Structures
Ole T. THOMSEN, Aalborg University , DENMARK

[352] Enhancing Buckling Limits in Honeycombs for Composite Sandwich Panels.
            MILLER Wayne , SMITH C. W. , SCARP F. I. , EVANS K. E.

[557] Investigation on the indentation behavior of sandwich beams using crushable and hyperelastic foam cores
            PITARRESI Giuseppe , AMORIM J. , ARENA A.

[483] Experimental study on mechanical properties of aircraft honeycomb sandwich structures
            TALEBI MAZRAEHSHAHI Hassan , ZAKERI A. a.

[485] Effect of Initial Debond Crack Location on the Face/core Debond Fracture Toughness
            QUISPITUPA YUPA Amilcar , BERGGREEN Christian

[258] Fracture Mechanics Characterization of Polymeric Foams
            GDOUTOS Emmanuel

[269] Numerical comparison between different strength after impact test procedures
            KLAUS Michael , REIMERDES Hans günther

[367] Performance of Pre-Stressed Sandwich Composites Subjected to Shock Wave Loading
            SHUKLA Arun , WANG Erheng

[465] Dynamic compression of lightweight interpenetrating phase composite (IPC) foams: Measurements and modeling
            TIPPUR Hareesh , PERIASAMY Chandru


A7 Polymers and elastomers
Noelle BILLON, Ecole Nationale des Mines, Paris, FRANCE

[399] Strain Analysis of the de Mattia Test
            MAJOR Zoltan , FEICHTER C.

[602] Prediction capability Analysis for laser machined internal micro-channels fabricated in polycarbonate and PMMA
            SHADI Karazi , BRABAZON Dermot

[419] Biaxial tension on polymer in thermoforming range
            COMBEAUD Christelle , BECKER Simon , FOURNIER Francis , RODRIGUEZ Jordy , BILLON Noelle

[535] Experimental testing of the sorption-mechanical coupled behaviour of semi-crystalline polymers into pressurized hydrogen
            CASTAGNET Sylvie , GRANDIDIER Jean claude , COMYN Mathieu , BENOIT Guillaume

[354] Characterisation of the mechanical behaviour of semi-crystalline polymers under multiaxial loading
            LAIARINANDRASANA Lucien

[539] Creep compression behavior of a polyurethane foam from cryogenic temperatures: size effect and long-term prediction
            DENAY Anne gaelle , CASTAGNET Sylvie , ROY Annette

[256] The polarization-optical analysis of mechanics crack problems in rubber
            ALBAUT Galina , AKHMETZYANOV M. , KHARINOVA N.

[507] thermomechanical analysis of Natural Rubber behaviour stressed at room temperature
            MURACCIOLE Jean michel , CABORGAN R. , WATTRISSE Bertrand , CHRYSOCHOOS André


A8 Thin films and coatings
Philippe GOUDEAU, Université de Poitiers, FRANCE

[406] Lab-on-chips based testing methods to investigate the mechanical behaviour of thin films
            CARBONNELLE Pierre , RYELANDT S. , BOE A. , COULOMBIER M. , ZULFIQAR A. , BHASKAR U. , RASKIN J. P. , PARDOEN T.

[19] Residual stresses in AlCrN PVD coatings
            PHAM Thi Huyen Tram , LE BOURHIS Eric , GOUDEAU Philippe , GUERIN Philippe

[35] A new biaxial tensile machine for mechanical characterization of metallic thin films
            DJAZIRI Soundes , GEANDIER G. , RENAULT Pierre olivier , LE BOURHIS Eric , GOUDEAU Philippe , THIAUDIERE D. , RANDRIAMAZAORO R. N. , CHIRON R. , CASTELNAU Olivier , FAURIE Damien , HILD François , BOUAFFAD A.

[591] A new biaxial tensile machine for mechanical characterization of metallic thin films
            DJAZIRI Soundes , GEANDIER G. , RENAULT Pierre olivier , LE BOURHIS Eric , GOUDEAU Philippe , THIAUDIERE D. , RANDRIAMAZAORO R. N. , CHIRON R. , CASTELNAU Olivier , FAURIE Damien , HILD François , BOUAFFAD A.

[422] High-throughput optimization of adhesion in multilayers by superlayer gradients
            GRACHEV Sergey , CUMINATTO C. , BARTHEL Etienne , SONDERGARD E

[365] Study of spin waves in magnetic thin films submitted to external mechanical stresses
            FAURIE Damien , KARBOUL Wiem , CHERIF Salim mourad , DJEMIA Philippe , RENAULT Pierre olivier , GOUDEAU Philippe

[474] Local contact stress measurements at a rough elastomeric layer
            SCHEIBERT Julien , KATZAV Eytan , ADDA BEDIA Mokhtar , PREVOST Alexis , DEBREGEAS Georges

[295] Buckling of Thin Films in Nano-scale
            WANG Shibin , JIA H. k. , REN X. n. , LI L. A.

[364] X-ray strain analysis in thin films enhanced by 2D detection
            FAURIE Damien , GEANDIER G. , RENAULT Pierre olivier , LE BOURLOT Christophe , DJEMIA Philippe , CASTELNAU Olivier , CHERIF Salim mourad , LE BOURHIS Eric , GOUDEAU Philippe

[368] Influences of microstructure, internal stresses and porosity on the mechanical properties of electroplated gold freestanding thin films
            MARTEGOUTTE Julien , SEGUINEAU C. , FOURCADE T. , MALHAIRE C. , MARTINS P. , DESMARRES J. M.

[24] Inelastic deformation behaviour of thermal barrier coatings exposed at a high-temperature environment
            ARAI Masayuki , WU Xiaohong

[259] Tribological Properties of Aluminum Alloy treated by Fine Particle Peening/DLC Hybrid Surface Modification
            AMANO Yuki , NANBU Hiroshi , KAMEYAMA Yutaka , KOMOTORI Jun


A9 Smart materials and systems
Fabrizio SCARPA, Bristol University , UK

[281] Auxetic shape memory alloy cellular structures for deployable satellite antennas: design, manufacture and testing
            SCARPA Fabrizio , JACOBS S. , COCONNIER C. , TOSO M. , DI MAIO D.

[360] Passive and smart mechanical behaviour of auxetic open cell PU foams
            SCARPA Fabrizio

[513] Energetics of macroscopic helical domain in different tube geometries and loading
            ZHOU Runhua , SUN Qing Ping


B: Measurement Techniques

B1 Digital holography
Motoharu FUJIGAKI, Wakayama University , JAPAN

[467] Strain Measurement Using Phase-shifting Digital Holography with Two Cameras
            FUJIGAKI Motoharu , NISHITANI Riku , MORIMOTO Yoshiharu

[420] Phase recovering algorithms for extended objects encoded in digitally recorded holograms
            PICART Pascal , TANKAM Patrice , PENG Z. , LI J. C.

[426] Investigation of crack origin in hybrid components with two-color digital Fresnel holography
            PICART Pascal , TANKAM Patrice , MOUNIER Denis , MOISSON Eric

[421] Investigation of dynamic of unconsolidated materials using two-color digital holography
            PICART Pascal , TANKAM Patrice , MOUNIER Denis , BOILEAU Jean pierre , TOURNAT Vincent , GUSEV Vitaly

[587] Measurement of three-dimensional stress field of RP model having a notch by using digital holography
            TANAKA Yohsuke , MURATA Shigeru


B10 Validation and Standards for Dynamic Analyses
Eann Patterson

[445] SPOTS project and development of standard and reference material
            PATTERSON Eann , BURGUETE Richard

[460] SPOTS calibration example
            PATTERSON Eann , ALBRECHT Daniel , DAVIGHI Andrea , HACK Erwin , WHELAN Maurice

[491] Standardization and validation of full-field techniques
            HACK Erwin , SIEBERT Thorsten

[498] Validation of full-field techniques: discussion of experiences
            HACK Erwin , BURGUETE Richard , SIEBERT Thorsten , DAVIGHI Andrea , MOTTERSHEAD John , LAMPEAS George , IHLE A. , PATTERSON Eann , PIPINO A.

[271] Image decomposition as a tool for validating stress analysis models
            PATTERSON Eann , MOTTERSHEAD John , PATKI Amol , WANG Weizhuo

[305] A reference material for calibration of dynamic displacement and strain measurements
            PATTERSON Eann , WHELAN Maurice , DAVIGHI Andrea

[321] Validation of non-linear dynamic simulations through full field optical methods
            LAMPEAS George , SIEBERT Thorsten

[332] Methodology for assessing impact damage using integrated simulation and experimentation
            FELIGIOTTI Mara , HACK Erwin , LAMPEAS George


B2 Digital image correlation
Michael SUTTON, University of South Carolina , Columbia , USA
Jean José ORTEU, Ecole des Mines, Albi, FRANCE

[310] Intragranular strain field in columnar ice during elasto-viscoplatic transient creep regime, and relation with the local microstructure
            GRENNERAT Fanny , MONTAGNAT M. , CASTELNAU Olivier , DUVAL P. , FRESSENGEAS C. , HILD François , VACHER P.

[581] Digital Image Correlation accuracy: influence of kind of speckle and recording setup
            BARRANGER Yoann , DOUMALIN Pascal , DUPRE Jean-christophe , GERMANEAU Arnaud

[311] Experimental Validation of 2D Uncertainty Quantification for Digital Image Correlation
            REU Phillip

[345] Digital Image Correlation technique applied to mechanical characterisation of aluminium foam
            DE GIORGI Marta , GIANCANE Simone , NOBILE Riccardo , PALANO Fania

[548] A stereo 3D DIC-system application for DSL strain and displacement measurements
            BERGGREEN Christian , RAUROVA Iva

[576] Digital image correlation: displacement accuracy estimation
            DUPRE Jean-christophe , BORNERT Michel , ROBERT Laurent , WATTRISSE Bertrand

[323] Evaluation of Mixed-mode Integral Invariant for Polymer Material Trough The Couple Experimental-Numerical Process
            MEITE Mamadou , POP Octavian , DUBOIS Frederic , ABSI Joseph

[443] Measurement of full-field deformation induced by a DC electrical field in organic insulator Films
            TUNG Tran anh , BERQUEZ Laurent , BOUDOU Laurent , MARTINEZ VEGA Juan

[407] Error assessment in Image Stereo-correlation
            FAZZINI Marina , MISTOU Sebastien , DALVERNY O.

[468] Mesoscopic Strains Maps in Woven Composite Laminas During Off-axis Tension
            NICOLETTO Gianni , ANZELOTTI G. , RIVA E.

[33] Damage law identification of a quasi brittle material from a bending test using digital image correlation
            LEPLAY Paul , RETHORE Julien , BAIETTO Marie-Christine , MEILLE Sylvain

[280] Development of a Digital Image Correlation controlled fatigue crack propagation experiment
            DURIF Emilien , RETHORE Julien , FREGONESE M. , COMBESCURE A.

[549] High speed materiel characterization of metals and composites using DIC
            BERGGREEN Christian , ERIKSEN Rasmus , BOYD Steven , DULIEU BARTON Janice m.

[532] Civil engineering structures monitoring using DIC technique
            MALESA Marcin , DARIUSZ Szczepanek , MAIGORZATA Kujawinska


B3 Photoelasticity
Hilar ABEN, Institute of Cybernetics , Tallinn , ESTONIA
Jean Christophe DUPRE, Université de Poitiers, FRANCE

[272] Using polarimeter and Stokes parameters for measuring linear birefringence and diattenuation properties of optical samples
            YU LUNG Lo , PO-CHUN Chen , TSUNG-CHIH Yu , JING FUNG Lin , TSUNG-TSE Yang

[333] Isoclinic ambiguity unwrapping of circular ring under diametric compression
            HUANG M. J.

[580] Experimental validation of a numerical simulation on a ball-screw system by 3D photoelasticity
            BARRANGER Yoann , BERTOLASO Romuald , DOUMALIN Pascal , DUPRE Jean-christophe , GERMANEAU Arnaud , CHEIKH Mohamed

[479] Measurement of the Optical Rotation Angle Using a Rotating-Wave-Plate Stokes Polarimeter
            JING FUNG Lin , YU LUNG Lo , TE TAN Liao , CHIH CHAO Chang

[469] Analysis of complex shape chain plate using transmission Photoelasticity
            DASARI N. , RAMESH K.

[30] Whole-field measurement of three-dimensional stress by scattered-light photoelasticity with unpolarized light
            KIHARA Toshiki

[285] Analysis of photoelastic stress fields in beam
            DVINIANIKOVA Marina

[255] Photoelastic residual stress measurement in non-axisymmetric glass containers
            ERRAPART Andrei , ANTON Johan

[278] Photoelastic tomography as hybrid mechanics
            ABEN Hillar , AINOLA L. , ERRAPART Andrei


B4 Speckle interferometry
Pascal PICART, Université du Mans, FRANCE

[348] Light-scattering measurements of micro-deformations in granular materials
            AMON Axelle , ERPELDING Marion , CRASSOUS Jerome

[480] The measurement of the modal strain fields using digital shearography
            LOPES Hernani , RIBEIRO J. E. , VAZ M. , GOMES J. m.

[501] A novel phase shift technique in shearography for NDT
            LIU Zhanwei , GAO Jianxin

[517] Phase extraction in dynamic speckle interferometry: proposal of a road map
            EQUIS Sebastien , JACQUOT P.


B5 Fringe analysis
Juan Antonio QUIROGA, Facultad de Ciencias Fisicas, Madrid, SPAIN
Valéry VALLE, Université de Poitiers, FRANCE

[617] Methodology for metrological analysis of periodic coding images: measurement resolution and spatial resolution
            ROTINAT Rene , MOLIMARD Jérome , BADULESCU Claudiu , BORNERT Michel , DUPRE Jean christophe , EQUIS Sébastien , PICART Pascal , VALLE Valery


B6 Optical fibres and sensors
John BOTSIS, EPFL, Lausanne, SWITZERLAND

[530] Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating
            BOTSIS John , LAI M. , CUGNONI J.

[427] Study of the mechanical behavior of the optical fibre by a track marks method
            CHEAN Vichtih , ROBIN Eric , EL ABDI Rochdi , SANGLEBOEUF Jean christophe

[448] Liquid Resin Infusion process monitoring with embedded superimposed long period and short period Bragg grating sensor
            ROBERT Laurent , TRIOLLET Sebastien , MARIN Emmanuel , OUERDANE Youcef

[304] Bridge pier scour measurement by means of Bragg grating arrays
            MANZONI Stefano , BALLIO Francesco , CIGADA Alfredo , CROTTI Gianluca , INZOLI Fabio



B8 X-ray tomography

[615] Full 3D displacement field measurement by Optical Scanning Tomography and PIV Tomography
            GERMANEAU Arnaud , DOUMALIN Pascal , DUPRé Jean-christophe , THOMAS Lionel , GRULIER Vincent , BRAUD Patrick , TREMBLAIS Benoit , DAVID Laurent

[470] Microstructure assisted Digital Volume Correlation
            PERIE Jean noel , LECLERC H. , FANGET A. , HILD François , ROUX Stephane

[504] Discrete volumetric digital image correlation for the investigation of granular type media at microscale
, PANNIER Yannick , LENOIR Nicolas

[394] Observations of corrosion pits and cracks in corrosion fatigue of high strength aluminum alloy by computed-tomography using synchrotron radiation
            NAKAI Yoshikazu , SHIOZAWA Daiki

[313] Stress field in deformed polycrystals at the micron scale
            CASTELNAU Olivier , BORNERT Michel , ROBACH O. , MICHA J. s. , ULRICH O. , CHIRON R. , LE BOURLOT Christophe


B9 Ultrasonic techniques

[430] Characterization and comparison of defects detection limits of three ultrasonic non destructive methods
            PERONNET Elodie , EYMA Florent , WELEMANE Helene , PESCAY Christophe

[547] Non-destructive evaluation of elastic properties, and ultrasonic attenuation of transverse wave of anisotropic and heterogeneous media
            BODIAN Pape arago , GUY P. , CHASSIGNOLE B. , DUPONT O.

[526] Effect of temperature on ultrasonic velocities of unconsolidated sandstones reservoirs during the SAGD recovery process
            DOAN Dinh hong , NAUROY Jean francois , DELAGE Pierre , MAINGUY Marc


C: Experimental methods, analysis and applications

C1 Identification from full-field measurements
Fabrice PIERRON, Ecole Nationale Supérieure des Arts et Métiers, Châlons en Champagne, FRANCE
Michel GREDIAC, Université de Clermont-Ferrand, FRANCE

[349] Electro-elastic coupling modeling from multiple wavelengths imaging microscopy
            FLAMMIER Cecile , FELEDA Yasmina , KANOUFI Frederic , TESSIER Gilles , ROGER Jean paul , AMIOT Fabien

[392] Viscoelastic material properties' identification using high speed full field measurements on vibrating plates
            GIRAUDEAU Alain , PIERRON Fabrice

[440] The equilibrium gap method : a two-scales approach
            AMIOT Fabien

[495] Identification of material properties from full field measurements of a sound field interacting with a solid
            VANLANDUIT Steve , VUYE C. , LONGO R. , GUILLAUME P.

[290] Applying a Bayesian Approach to Identification of Orthotropic Elastic Constants from Full Field Displacement Measurements
            GOGU Christian , YIN Weiqi , HAFTKA Raphael , IFJU Peter , MOLIMARD Jerome , LE RICHE Rodolphe , VAUTRIN Alain

[393] Mechanical properties of low density polymeric foams obtained from full-field measurements
            PIERRON Fabrice

[34] Digital image correlation and infrared measurements to determine the influence of a uniaxial pre-strain on fatigue properties of a dual phase steel.
            MUNIER Remi , DOUDARD Cedric , CALLOCH Sylvain , XEBER Bastien



C11 Inverse problem
Marc BONNET, Ecole Polytechnique, Palaiseau , FRANCE

[387] A new method for the identification of the material behaviour under uniaxial loading in terms of inverse modelling
            VASILAKOS Ioannis , SOL Hugo

[380] Influence of temperature on the identification of the elastic properties of composite materials
            BOTTIGLIERI Massimo , SOL Hugo

[29] Experimental and Computational Method for Determining Parameters of SSS from the Data Obtainable by Interference Optical Techniques - abstract
            RAZUMOVSKY Igor , CHERNYATIN Alexander




C2 Thermomechanics
Janice BARTON, University of Southampton , UK
André CHRYSOCHOOS, Université de Montpellier, FRANCE
Umberto GALIETTI, Politecnico di Bari, ITALIA

[569] Thermal conductivity measurement in clay dominant consolidated material by Transient Hot-Wire method.
            GALLIER Jonathan , GARNIER Jean philippe , MERCX B. , DUDOIGNON Patrick , MILCENT D.

[554] Experimental study of the stress concentration factor in pin-loaded joints using thermoleastic stress analysis
            QUINN Simon , DULIEU BARTON Janice m. , SAMBASIVAN S.

[320] Experimental analysis of the Portevin Le Chatelier effect by means of full field non contact techniques
            SESANA Raffaella , CURA Francesca , MATTEIS P. , SCAVINO G.

[294] One-shot measurement of thermal and kinematic fields from Infra-Red Image Correlation (IRIC)
            MAYNADIER Anne , PONCELET Martin , LAVERNHE-TAILLARD Karine , ROUX Stephane

[611] Derivation of temperature dependent material properties of polymer foam core materials using optical extensometry
            BARTON Janice , BOYENVAL LANGLOIS C. , THOMSEN O. T.

[516] Multiscale energy analysis of phase change localization in monocrystalline shape memory alloys
            CHRYSOCHOOS André , VIGNERON Sylvere , PEYROUX Robert , WATTRISSE Bertrand

[254] Quantitative thermoelastic measurement on a helicopter glass fibre component underneath a surface anti-fretting coating.
            SALERNO Antonio , COSTA A.

[619] Experimental and Numerical Study on Temperature Evolution for Rapid Evaluation of Fatigue Limit
            HUNG ANH Ly , HIROTSUGU Inoue , YOUSUKE Irie

[296] Thermal emission in fatigue described by exponential laws
            CURA Francesca , GALLINATTI A. E. , CURTI Graziano , SESANA Raffaella

[403] Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation
            RICOTTA Mauro , ATZORI Bruno , MENEGHETTI Giovanni

[455] Experimental study to verify the fatigue limit found by thermal analysis of specimen surface in mono axial traction test.
            GIACOMO Risitano , CLIENTI C.

[536] Detection of Through-Deck Type Fatigue Cracks in Steel Bridges by Self-Reference Lock-in Thermography
            IZUMI Yui , SAKAGAMI Takahide , KUBO Shiro , TAMAKOSHI Takashi

[552] Application of thermal methods for characterization of steel welded joints
            PALUMBO Davide , GALIETTI Umberto , GINEX Antonella

[356] Dissipative energy as an indicator of material microstructural evolution.
            CONNESSON Nathanael , PIERRON Fabrice , MAQUIN Francois

[559] Thermal NDE of thick GRP panels by means of a Pulse Modulated Lock-In Thermography technique
            PITARRESI Giuseppe

[553] Thermoelastic stress analysis of titanium components and simultaneous assessment of residual stress
            PALUMBO Davide , GALIETTI Umberto

[555] Thermoelastic investigation of residual stress: Plastic deformation and the change in thermoelastic constant
            ANDREW Robinson , DULIEU-BARTON Janice m. , QUINN Simon , BURGUETE Richard


C3 Impact mechanics and high strain rate

[560] Damage Analysis for Hypervelocity Impact Experiments on Spaceship Windows Glass
            JIYUN Yang , JIANDONG Zheng , ZIZHENG Gong , HEWEI Pang

[270] A New Compression Intermediate Strain Rate Testing Apparatus
            GILAT Amos , MATRKA Thomas

[519] Experimental approach and modelling of the mechanical behaviour of graphite fuel elements subjected to compression pulses
            FORQUIN Pascal

[524] Identification of strain-rate and thermal sensitive material model with an inverse method
            PERONI Lorenzo , PERONI M. , SCAPIN M.

[505] Design of an impact loading machine to determine constitutive laws at medium or high strain rate
            FROUSTEY Catherine , DENNEULIN Sebastien , VIOT Philippe

[556] Experimental investigation of an aggregate material behavior under confinement at high strain rates
            DELVARE Franck , VIAL Jerome , BAILLY Patrice , PICART Didier , BIESSY Maxime

[510] Influence of aggregate size on the dynamic behaviour of concrete subjected to impact loading
            ERZAR Benjamin , FORQUIN Pascal , PONTIROLI Christophe , BUZAUD Eric

[376] Determination of Tensile Properties of Polymers at High Strain Rates
            MAJOR Zoltan , JERABEK Michael , REITER M.

[518] An experimental method of measuring the quasi-static and dynamic confined behaviour of PMMA
            FORQUIN Pascal , NASRAOUI Makrem , SIAD Larbi , RUSINEK Alexis

[447] Morphological aspects and deterministic reconstruction of dynamical fracture surfaces in brittle materials
            DALMAS Davy , GUERRA Claudia , SCHEIBERT Julien , BONAMY Daniel

[472] Brittle/quasi-brittle transition in dynamic fracture: An energetic signature
            SCHEIBERT Julien , GUERRA Claudia , DALMAS Davy , BONAMY Daniel

[265] Experimental study of dynamic fragmentation of shock-loaded metals below and above melting
            SIGNOR Loic , LESCOUTE Emilien , DE RESSEGUIER Thibaut , DRAGON Andre , ROY Gilles


C4 Testing at micro and nano-scale
Leslie BANKS-SILLS, Tel Aviv University , ISRAEL
Horacio ESPINOSA, Northwestern University , USA

[484] From the bottom up – measuring bulk mechanical properties via microtechnology
            BARBOSA Nicholas , KIM Sudook , READ David

[372] Characterizing time-dependent mechanics in metallic MEMS
            BERGERS Lambert , DELHEY Norman , HOEFNAGELS Johan , GEERS Marc G.D.

[336] Nano-scale mapping of mechanical properties in mollusk shells
            SHILO Doron , DREZNER Haika , DOROGOY Avraham , ZOLOTOYABKO Emil

[338] Applicability of the Bulge Equations in plane strain bulge experiments
            NEGGERS Jan , HOEFNAGELS Johan , GEERS Marc G.D.

[413] Study of elementary deformation mechanisms in MgO induced by nanoindentation: experiments and simulation
            MONTAGNE Alex , TROMAS Christophe , FIVEL Marc , AUDURIER Valerie , WOIRGARD Jacques

[601] Buckle Driven Delamination in Thin Hard Film Compliant Substrate Systems
            MOODY Neville , REEDY JR. E. d. , CORONA E. , ADAMS D. P. , KENNEDY M. S. , CORDILL M. j. , BAHR D. f.

[589] Anelastic Mechanical Behavior Measurement of thin Films Using Novel Beam deflection Method
            MING TZER LIN Ming tzer , TONG Chi jia , HSING K. s.

[453] A simple experimental procedure to evaluate image noise and geometric errors in the context of strain measurements at the microscale using DIC and SEM images
, HERIPRE Eva , EL OUTMANI Sohaib , CALDEMAISON Daniel

[355] Failure mechanisms and electromechanical coupling in semiconducting nanowires
            ESPINOSA Horacio , PENG B. , AGRAWAL R.


C5 Structural dynamics and vibrations
Minvydas RAGULSKIS, Kaunas University of Technology , LITHUANIA

[451] Experimental implementation of visual cryptography based on time average moiré
            RAGULSKIS Minvydas , FEDARAVICIUS Algimantas , RAGULSKIENE Jurate

[21] Measuring Impact Rebound with Photography
            SUMALI Hartono

[482] Selecting appropriate dynamic model for elastomeric engine mounts to approximate experimental FRF data of them
            JAHANI Kamal

[264] Is Dynamic Mechanical Analysis (DMA) a non-resonance technique?
            PLACET Vincent , FOLTETE Emmanuel

[452] Identification of sandwich structures by high-resolution modal analysis.
            REBILLAT Marc , BOUTILLON Xavier


C6 Fracture and fatigue
Emmanuel GDOUTOS, Democritus University of Thrace , GREECE
Krishnaswamy RAVI-CHANDAR, University of Texas at Austin , USA

[325] Fatigue life estimation for different notched specimens based on the volumetric approach
            HASSANIFARD Soran , ZEHSAZ Mohammad , ESMAEILI Firooz

[291] The effects of sheet spacing on the fatigue life of spot-welded joints
            HASSANIFARD Soran , ZEHSAZ Mohammad , ESMAEILI Firooz

[428] Experimental and numerical in-plane displacement fields for determine the J-integral on a PMMA cracked specimen
            HEDAN Stephen , VALLE Valery , COTTRON Mario

[402] Measurement of Opening Displacement of Single and Bifurcated Notches by Moiré Interferometry
            SUZUKI Shinichi , MIYASHITA Tomotaka , KIMURA Hideyuki , NISHIKITA Shouhei

[379] Coupling creep and damage in concrete under high sustained loading: Experimental investigation on bending beams and application of Acoustic Emission technique.
            SALIBA Jacqueline , LOUKILI A. , GRONDIN F.

[257] LCF on turbogenerator rotors and coil retaining rings: material characterization and sensitivity analyses
            OLMI Giorgio , FREDDI Alessandro

[8] Delamination Tests of DCB Specimens Composed of Woven Composites
            BANKS-SILLS Leslie , ABOUDI Jacob , ELIASI Rami , FOURMAN Victor , ROGEL Liran

[404] Development of an opening-tearing mode fracture system for composite materials
            SZEKRENYES Andras

[408] Influence of the Inclusion Particles Present in the Immediate Vicinity of a Crack on Stress Variation
            GOANTA Viorel , MIHALCUT M.

[339] Line Creep in Paper Peeling
            KOIVISTO Juha , ILLA Xavier , ROSTI Jari , ALAVA Mikko

[373] An advanced experimental approach for detailed in-situ characterization of interface delamination
            HOEFNAGELS Johan , KOLLURI M. , VAN DOMMELEN J. A. W. , GEERS Marc G.D.

[444] Direct Observation and Analysis of Crack Front Morphology during Crack Pinning by Heterogeneous Interface
            DALMAS Davy , BARTHEL Etienne , VANDEMBROUCQ Damien

[612] On a separating method for mixed-modes crack growth in wood material using image analysis
            MOUTOU PITTI Rostand , POP Octavian , DUBOIS Frederic

[546] Near-crack-tip measurements within an Arlequin modeling for the numerical evaluation of far-field quantities of interest
            PUEL Guillaume , JAMOND Olivier , HUMBERT Laurent , BEN DHIA Hachmi

[582] X-ray computed tomography coupled to Digital Volume Correlation applied to a stationary crack case
            BARRANGER Yoann , DOUMALIN Pascal , DUPRE Jean-christophe , GERMANEAU Arnaud , HEDAN Stephen , VALLE Valery

[375] Strain Rate, Acoustic Emission and Wave Velocity during Fatigue Tests on Paper
            MIKSIC Amandine , KOIVISTO Juha , KARPPINEN Timo , ALAVA Mikko , MYKKANEN Emma , MUSTONEN Kimmo , HAGGSTROM Edwards , SAARENPAA J.

[20] Fracture and strain rate behaviour of airplane fuselage materials under blast loading
            MEDIAVILLA VARAS Jesus , SOETENS F. , VAN AANHOLD J. e.

[260] Influence of sand movement in the Sahara on the erosion of the network of pipelines transporting hydrogen
            ALHUSSEIN Akram , CAPELLE J. , GILGERT J. , TIDU A. , HARIRI S. , AZARI Z.

[341] Copper-Rubber Interface Delamination in Stretchable Electronics
            NEGGERS Jan , HOEFNAGELS Johan , TIMMERMANS P.h.m , GEERS Marc G.D.

[449] Impact damage evolution under fatigue loading by InfraRed Thermography on composite structures
            GARNIER Christian , LORRAIN B. , PASTOR M. I.

[22] Analysis of damaging process and crack propagation
            SEMENSKI Damir , WOLF H. , BOZIK Z.

[436] Pre-fatigue influence on quasi-static tensile properties of Ti-6Al-4V in thin-sheet form
            GALAN LOPEZ Jesus , VERLEYSEN Patricia , DE BAERE Ives , DEGRIECK Joris

[570] Evaluation of the nocivity of dent and combination of dent and gouge on burst pressure of steel pipe
            ALLOUTI Mustapha , SCHMITT C. , PLUVINAGE G. , LEBIENVENU M.


C7 Damage assessment
Damien HALM , Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, Poitiers, FRANCE
André DRAGON, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, Poitiers, FRANCE

[478] Experimental damage analysis of steels after exploitation loading
            KOWALEWSKI Zbigniew , SZELAZEK Jacek , MACKIEWICZ Sławomir , AUGUSTYNIAK Bolesław

[277] Experimental study of the creep lifetime of the butt-welded 1.25Cr0.5Mo steel pipes
            SAJJADPOUR Mehdi , VAKILI TAHAMI Farid , ZEHSAZ Mohammad

[503] ANOVA parameters influence in LCF experimental data and simulation results
            SESANA Raffaella , DELPRETE C. , VERCELLI A.

[525] Experimental characterisation of a cohesive zone model using digital image correlation
            HUON Vincent , RICHEFEUD V. , SHUANGA W. , CHRYSOCHOOS André , MONERIEB Y. , WATTRISSE Bertrand



C9 Residual stress analysis
Jian LU, Hong Kong Polytechnic University , HONG-KONG

[27] Shot peening of carbonitrided steel: influence of the process on the mechanical state
            VAN WIJK Song , FRANCOIS Manuel , SURA Edoardo

[565] Neutron diffraction analysis of residual strain/stress distribution in the vicinity of high strength welds
            MIKULA Pavol , MRAZ Lubos , KARLSSON Leif , HAMAK Ivan , VRANA Miroslav

[409] Aspects of the determination of residual stresses in ceramics by ultrasounds hole-drilling
            GOANTA Viorel , BARSANESCU P. D. , LEITOIU B. , BATCA C.

[273] Evaluation of residual stresses using ring core method
            VACLAVIK Jaroslav , WEINBERG Otakar , BOHDAN Petr , JANKOVEC Jiři , HOLY Stanislav

[337] Evaluation of surface residual strains in a ball drifted chain plate using strain gauge.
            CHERYL MARIA TELLIS Cheryl , DASARI N. , NATARAJAN R.

[527] Characterization of residual stresses in heat treated Ti-6Al-4V forgings by machining induced distortion
            REGENER Benjamin , KREMPASZKY C. , WERNER E.


Site Map | Organisator's area | Contact | Webmaster | lawful mention
Last modified - 2010/02/08
Optimized for Firefox Icone top of form
texte